What’s New - On-Site/Septic Tanks
|
NuConSept Plus
Snyder Industries, Inc. has introduced its “next generation” polyethylene septic tank product NuConSept Plus. The new product line has the ability to be buried without the requirement of water being used for ballast and strength and can be backfilled with native soils as long as those soils are trash-free and free-flowing. The tanks can also be used as a holding tank and pump tank versions are also available. NuConSept Plus serves as a compliment to Snyder’s existing, highly successful
NuConSept line of septic tanks, giving Snyder the broadest and most versatile choice of polyethylene septic tanks in the industry.
NuConSept Plus is a low-profile (51” height) product which was designed using state-of-the-art finite element analysis (FEA) to insure that superior strength was achieved without sacrificing the weight and handling advantage of most polyethylene septic tanks. The design is also significant in that the integrity of the manhole is not compromised by high stresses placed on any other area of the tank. This results in a manhole that always stays round and level. Coupled with the tank’s seamless construction and Snyder’s extra-strength double-wall lid, the
NuConSept Plus product insures a water-tight installation. In fact, NuConSept Plus is the only polyethylene septic tank to achieve a category 3 rating in Florida without any additional measure taken to secure the lid to the tank other than what is normally required in the field.
The product line is available in a 750 gallon, 900 gallon, 1050 gallon, 1250 gallon, and 1500 gallon versions. Applicable water cistern versions are also available.
|
 |
300/400 Gallon Water Closet Tank
Snyder is now introducing a new line of water closet tanks. The self supporting units are designed specifically to fit through narrow spaces ( 30” doorways) for household water storage capabilities. The units are designed for use with potable water.
Features:
- Available in 300 gallon and 400 gallon capacities
- FOB Marked Tree, Lincoln, and Philippi
- Only 29” wide to fit through narrow household doorways
- Designed optimized to minimize outward deflections
- Available in July.
- NSF for potable water
- Fitting recessed to protect form damage
- Comes standard with 18” threaded manway
a. For easy clean out
- Self supporting design
a. No steel frame required
- Natural in color to allow easy view water level
Water Closet Brochure -pdf
|
 |
500 Gallon NuConSept Low Profile Tank
Snyder Industries is pleased to introduce the newest addition to our On-Site Tank Line, the 500 Gallon Low Profile Tank.
This new tank has the following advanced engineered specifications:
- short, low profile design for ease of installation in rocky areas
- low height keeps the tank out of the higher water tables
- recessed and isolated manway, molded-in drain trough isolates manway from any tank deformation
- Excellent shipping economies, tanks nest for shipping: 26 tanks can ship on a 48’ step deck
In addition, the tanks incorporate many of the standard NuConSept features:
- one piece seamless construction
- aggressive rib design for extra strength
- ease of installation
- leak proof seals
- recessed inlets and outlets to protect the sealing area from damage during installation
- corner stabilization lugs for hand holds and anchors to resist floatation in high water tables and attachments points for lower tank into the hole.
- superior chemical resistance
- excellent impact resistance
- molded in lifting ears
- pre-plumbed and ready to install
- double wall id on outlet end for access to pumping and effluent filter service.
|
 |
5000 x 102” Water Tank in Philippi, WV
Snyder has added a 5000 gallon x 102” diameter tank to it’s above ground water storage tanks. The tank offers the following economical features:
- Tank ships on a standard truck bed
- 4 tanks per truckload
- Natural, translucent color allows easy viewing of liquid level
- Economically priced
- Graduated gallonage markers
|
 |
top
|
