|
|
- Available
in 30º, 45º, and 60º slopes, sizes range from 15-13,000
gallons.
- Material
options for a diverse range of application requirements.
- - High-density linear
polyethylene (HDLPE)*- black and natural white color -
complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
- - Cross-linked, high density polyethylene (XLPE) - black and natural white color
- Available
with seismic zone 4 and UBC 110 mph wind restraint tie-down
systems.
- Specific
gravity ratings are based on the industry's most severe
calculation.
- Standard
specific gravity choices are 1.5 and 1.9, other ratings are
available upon request.
- All
materials are UV stabilized for long-term outdoor service.
- Maximum
operating temperature recommended for Cone Bottom tanks is 100
degrees F.
|
|
Click on the Tank number below to see the associated technical
drawing in .PDF format. Get free Acrobat
Reader here.
Tank dimensions may vary depending on
manufacturing location - please contact factory for drawing specific
to the F.O.B. location. Specifications Subject to Change Without
Notice.
Dimensions listed below and on drawings may vary +/- 3% (standard
rotational molding tolerance).
|
top
| Part Number |
SMALL
CONE STANDS |
|
48900 |
15 Gallon Cone Stand |
| 48400 |
17 Gallon Cone Stand |
| 48600 |
35, 65, 110 Gallon Cone Stands |
top
| Part Number |
CONE STANDS - 30 & 60
DEGREE FOB "C" TANKS |
| C5070P 70 (P/N H15601--) |
70 Gallon Basket & Stand |
| C5475P 475 (P/N H15603--) |
475 Gallon Basket & Stand |
| C5500P 500 (P/N H18801--) |
500 Gallon Basket & Stand |
| Part Number |
CONE STANDS 30 DEGREE |
| 79000 (welded) |
86" 4 Leg Stand for 500,1000,1400,1650 Cone
Tanks |
|
78900 (welded) |
86" SEISMIC 4 LEG for 1650 Cone Tank |
| 79300 (welded) |
90" 12 Leg 65 TON Stand for 2000-6500 Cone
Tanks (SEISMIC for 2000-3000 Cone Tanks) |
| 79800 (welded) |
90" 12 Leg SEISMIC stand for 3900-4400 Cone
Tanks |
| 79500 |
142" 12 Leg 100 TON GROSS WEIGHT CAPACITY Stand
for 6000 - 11,500 Cone Tanks |
| 79600 |
20" Cone Bottom Stand Extension |
| 79700 |
40" Cone Bottom Stand Extension |
| 78401000 |
95" Cone Stand |
| Part Number |
CONE STANDS 45 DEGREE |
| 78800 (welded) |
64" 12 TON 4 Leg Stand for 500,1000,1500 Cone
Tanks |
| 79900 |
90" 12 Leg SEISMIC for 4100 - 5600 Cone Tanks |
| 79400 |
90" 60 TON 12 Leg Stand for 2600-5600 Cone
Tanks |
top
TOTAL DRAIN TANKS - Closed Top Tanks
(These total drain tanks must be ordered with plastics stands listed below
- No Exceptions)
top
PLASTIC STANDS (required on tanks listed directly above)
top
Note: all stands are coated with black water based enamel paint
with rust inhibitor
Tanks available in 1.5, and 1.9 Specific Gravity in HDLPE and XLPE
materials. Contact factory for availability.
SEISMIC CONE STANDS: All above stands are seismic
approved, however you must use designated stand where gallonage is
indicated
Contact Factory for Seismic on 5600, 6500, 11,500 CONE TANKS
F.O.B: L = Lincoln, Nebraska; M = Marked Tree,
Arkansas; P = Philippi, West Virginia; C = Chowchilla, California
top
|
Industrial
Tanks - Cone Bottom