Industrial Tanks - Accessories
Click on the Tank number below to see the associated technical
drawing in .PDF format. Get free Acrobat
Reader here.
Tank dimensions may vary depending on
manufacturing location - please contact factory for drawing specific
to the F.O.B. location. Specifications Subject to Change Without
Notice.
|
| TANK ACCESSORIES |
|
| INSULATION |
Factory
installed nominal 2" thick polyurethane foam insulation with
two coats of gray latex mastic coating. FOB Lincoln,
Nebraska plant only |
| Part Number |
|
| 000259 |
VERTICAL TANKS ONLY |
| 347289 |
INSULATION REPAIR KIT |
| LADDERS/SAFETY CAGE |
|
| Part Number - FRP |
|
|
347-- |
LADDER (POLYESTER) - VERTICAL STORAGE TANKS ONLY UP
TO 15,000 CAPACITY Must add one attachment assembly per
ladder up to 15,000 capacity |
| Part Number - FRP |
|
|
347-- |
LADDER (powder coated steel) VERTICAL STORAGE TANKS
ONLY |
| 347-- |
CAGE (powder coated steel) VERTICAL STORAGE TANKS
ONLY |
Note: steel ladders are manufactured of mild steel and coated with a
polyester gray powder coating. FRP ladders are supplied safety
yellow. Note: Cage must start at 7'-8' range to meet OSHA
requirements. Cage not required on tanks less than 20' high.
top
| Part Number |
SEISMIC CABLE TIE DOWN SYSTEMS |
| 347-- |
400-3000 & 3900*-8750 VERTICAL STORAGE TANKS |
| 347-- |
Gallonage exceptions: 4400x90, 4900, 5500x90,
6000,7500, 8500, 9500, 10500, 12500, 15000, and 16,500 Gal.
Vertical Storage Tank |
| 347-- |
500-11,500 GALLON CONE BOTTOM STORAGE TANK |
Note: System includes: coated carbon steel anchors, cable, sheathing,
U-bolt clips, thimble, eye bolt, complete instructions. Seismic
Tie-down System is also available in stainless steel. Systems do not
include anchor bolts. For FOB Marked Tree, Arkansas tanks, tie-down
systems are available on 48",64",90", and 120"
diameter tanks only. System meets current UBC, Zone 4, Section 2316
| Part Number |
UTRASONIC LEVEL INDICATOR |
| 347-- |
ULTRASONIC LEVEL INDICATOR- INCLUDES PVC FITTING |
top
| Part Number |
SIGHT GLASS ASSEMBLY (PVC) |
| 347198 |
SIGHT GLASS ASSEMBLY - BULKHEAD THREADED FITTINGS W/EPDM
GASKETS W/O VALVES |
| 347362 |
SIGHT GLASS ASSEMBLY - BULKHEAD THREADED FITTINGS W/VITON
GASKETS W/O VALVES |
| 347363 |
*SIGHT GLASS ASSEMBLY - BOLTED FITTINGS W/EPDM
GASKETS W/O VALVES (SS BOLTS) |
| 347364 |
*SIGHT GLASS ASSEMBLY - BOLTED FITTINGS W/VITON
GASKETS W/O VALVES (SS BOLTS) |
Note: Above assembly includes (2) 3/4" PVC fittings; 2 3/4"
PVC Nipples; 2 Hose barbs and clamps; flex tube; gaskets.
*Note: Bolted assembly used on VST 10,500 and above
| Part Number |
SIGHT GLASS ASSEMBLY (CPVC) |
| 347973 |
SIGHT GLASS ASSEMBLY - BULKHEAD THREADED FITTINGS W/VITON
GASKETS W/O VALVES |
Note: Above assembly includes 2- 3/4" fittings (CPVC); 2 -
3/4" nipples (CPVC); 2 - hose barbs and clamps; flex tube; gaskets.
| Part Number |
REVERSE FLOAT INDICATORS |
| 347267 |
REVERSE ACTION FLOAT LEVEL GALLONAGE INDICATOR |
| 3481135 |
STENCILED CALIBRATION BOARD (OPTIONAL) |
top
| Part Number |
VALVES FOR SIGHT GLASS ASSEMBLY
- PVC & CPVC |
| 347365 |
1 - 3/4" VALVE (PVC) (includes valve, nipple
and sealant) VITON "O" RINGS |
| 347366 |
1 - 3/4" DRAIN VALVE W/TEE (PVC) (includes
valve, tee, nipple and sealant) |
| 347975 |
1 - 3/4" VALVE (CPVC) (includes valve, nipple
and sealant) VITON "O" RINGS |
| 347976 |
1 - 3/4" DRAIN VALVE W/TEE (CPVC) (includes
valve, tee, nipple and sealant) |
top
| PVC/CPVC EXTERNAL
DOWNPIPE ASSEMBLY - TANK SUPPORTED (schedule 80 PVC/CPVC) |
| PVC |
CPVC |
|
| Part Number |
Part Number |
| 347817 |
347970 |
DOWNPIPE ASSEMBLY 2" W/VITON GASKETS (FITTINGS
NOT INCLUDED) |
| 347818 |
347971 |
DOWNPIPE ASSEMBLY 3" W/VITON GASKETS (FITTINGS
NOT INCLUDED) |
| 347819 |
347972 |
DOWNPIPE ASSEMBLY 4" W/VITON GASKETS (FITTINGS
NOT INCLUDED) |
| 347375 |
N/A |
DOWNPIPE ASSEMBLY 6" W/VITON GASKETS (FITTINGS
NOT INCLUDED) |
top
| Part Number |
EXTERNAL FILL PIPE ASSEMBLIES -
GROUND SUPPORTED (does not include fitting) |
| 347-- |
2" EXTERNAL FILL PIPE ASSEMBLY |
| 347-- |
3" EXTERNAL FILL PIPE ASSEMBLY |
| 347-- |
4" EXTERNAL FILL PIPE ASSEMBLY |
top
| Part Number - PVC |
DOWNPIPE SUPPORT SADDLE CLAMP
ASSEMBLY (schedule 80 PVC) |
| 347809 |
DOWNPIPE SADDLE CLAMP ASSEMBLY 2" (PVC) W/EPDM
(includes 1" bulkhead threaded ftg.) |
| 347810 |
DOWNPIPE SADDLE CLAMP ASSEMBLY 3" (PVC) W/EPDM
(includes 1" bulkhead threaded ftg.) |
| 347811 |
DOWNPIPE SADDLE CLAMP ASSEMBLY 4" (PVC) W/EPDM
(includes 2" bulkhead threaded ftg.) |
| 347813 |
DOWNPIPE SADDLE CLAMP ASSEMBLY 2" (PVC) W/VITON
(includes 1" bulkhead threaded ftg.) |
| 347814 |
DOWNPIPE SADDLE CLAMP ASSEMBLY 3" (PVC) W/VITON
(includes 1" bulkhead threaded ftg.) |
| 347815 |
DOWNPIPE SADDLE CLAMP ASSEMBLY 4" (PVC) W/VITON
(includes 2" bulkhead threaded ftg.) |
| Part Number - CPVC |
(schedule 80 CPVC) |
| 347964 |
DOWNPIPE SADDLE CLAMP ASSEMBLY 2" (CPVC) W/VITON
(includes 1" bulkhead threaded ftg.) |
| 347965 |
DOWNPIPE SADDLE CLAMP ASSEMBLY 3" (CPVC) W/VITON
(includes 1" bulkhead threaded ftg.) |
| 347966 |
DOWNPIPE SADDLE CLAMP ASSEMBLY 4" (CPVC) W/VITON
(includes 2" bulkhead threaded ftg.) |
top
| Part Number |
WELDED SUPPORT SADDLE CLAMP
ASSEMBLY (PE/PVC) |
| 3471149 |
2" WELDED SUPPORT SADDLE CLAMP ASSEMBLY
(PE/PVC) |
| 3461150 |
3" WELDED SUPPORT SADDLE CLAMP ASSEMBLY
(PE/PVC) |
| 3471162 |
2" OR 3" WELDED SUPPORT SADDLE CLAMP
ASSEMBLY (PE/PVC) |
top
| Part Number |
Part Number |
|
| PVC SCHEDULE 80 PIPE |
CPVC SCHEDULE 80 PIPE |
(per foot) |
| 3442204 |
342261 |
PIPE 1" (PVC OR CPVC) SCHEDULE 80 |
| 342050 |
342157 |
PIPE 2" (PVC OR CPVC) SCHEDULE 80 |
| 342205 |
342158 |
PIPE 3" (PVC OR CPVC) SCHEDULE 80 |
| 342199 |
342262 |
PIPE 4" (PVC OR CPVC) SCHEDULE 80 |
|
Tank Saver Platform |
|
590000 |
Tank Saver Platform |
102" Gray Only |
L |
top
|
